Fire door installation London: certified doorsets, fitted right.

Factory-rated FD30 and FD60 doorsets supplied and installed by certified installers, complete with compliant hardware, seals and signage, and documented down to the last hinge screw.

Request a quote Book a visit

FIRE DOORKEEP SHUT

FD30RATED

NEW DOORSET~~FD30S certified~~

Gaps set~~3mm head and stiles~~

Ironmongery~~CE marked, fire rated~~

UKFDT Approved Inspector · Installer · MaintainerBS 476 · EN 1634 rated doorsets2,400+ doors certifiedMon to Sat, 9am to 6pm · Inside the M25

A doorset, not just a door

A fire door only achieves its rating as a complete, correctly fitted assembly: leaf, frame, seals, hinges, closer, glazing and signage working together. That is why we install certified doorsets rather than swapping leaves into unknown frames, and why fitting tolerances are measured, not eyeballed.

Our installers work in occupied residential blocks, HMOs, schools, healthcare sites and commercial premises across London: flat entrance doors, communal and corridor doors, riser and service cupboard doors, plant rooms and final exits.

Every installation ends with a functional check, photographic sign-off and the documentation your compliance record needs.

FD30 / FD60factory-rated doorsets for 30 and 60 minute fire resistance

Certifiedinstallation by trained, accredited installers, never subcontracted blind

Documentedphotos, product data and completion certificate with every fit

How long a doorset holds back fire

Ratings are tested protection periods under BS 476 Part 22 and EN 1634-1. The right rating depends on the door's location in the building's fire strategy, and we confirm it per opening before anything is ordered.

Every installation includes

Certified FD30 or FD60 doorset matched to the opening and use
Fire-rated hinges, closer, latch and any specified access control prep
Intumescent and smoke seals fitted and continuous
Gaps set to tolerance at head, sides and threshold
Statutory signage fitted to both faces as required
Old doorset removed and disposed of responsibly
Functional close check and photographic sign-off

Working in occupied buildings

Most of our installs happen with residents at home or staff at work. Expect clear notice, protected floors, one door out of use at a time, and a building that is secure again the same day, every day.

Get an installation quote →

Related services

Fire Door Survey

A door-by-door condition survey with photographic evidence and a prioritised action register.

Learn more →

Fire Door Certificate

Evidence packs and certification so responsible persons can demonstrate compliance.

Learn more →

Fire Door Remedial Works

Gaps, seals, hinges and closers restored to certified performance.

Learn more →

Installation FAQs

A straightforward doorset replacement typically takes half a day including seals, hardware, signage and sign-off. Structural opening work, access control or non-standard sizes add time, which the quote will state per door.

It depends on the door's location and the building's fire strategy: FD30 covers most flat entrance and corridor doors, while FD60 is common for riser cupboards, plant rooms and higher-risk locations. We confirm the rating per opening before ordering.

Certified doorsets come in a wide range of finishes, colours and vision panel options. In conservation and heritage settings we will tell you honestly what can be achieved within certification limits.

A completion certificate, photographic record, and product certification for the doorset and components, compiled per door reference. See our fire door certificate service for the full pack.

Fit doors that prove themselves.

Send the door count, locations and ratings if you know them, and we will return a fixed installation quote.

Request a quote Book a visit